Buddy Bearings

           Bearing Buddy Outer Bearings - Model 1980 with Level Ring - Clamshell Pair - When backed into the water for launching, boat trailer wheel hubs, heated by travel, are suddenly cooled. Air inside the hubs contracts and a vacuum is created. Water and dirt are sucked into the hubs through the inner seals and corrosion sets in immediately. Bearing failure can be expected within two seasons in fresh water - one season in salt water. When properly installed and maintained, bearing buddy prevents wheel bearing failure and eliminates bearing repacking.

          Boat trailer wheels can be completely submerged. Bearing buddy also prevents bearing failure on motorcycle, utility, snowmobile, camping, and other trailers by eliminating moisture build-up in hubs and providing proper lubrication. A wheel hub does not have bearing protection unless a slight positive pressure is maintained inside the hub. If pressure is not maintained, water will enter and corrode bearings. Bearing buddy creates this pressure, which is limited to 3 psi.

          features The original product proven in 25 years of service keeps water and dirt out of hubs makes boat trailer wheels safely submersible, ends the mess of repacking bearings. Pressure relief feature protects hub seals, prevents over filling, quick, positive lubricant level check. Made of steel and 100 percent inspected for long term tight hub fit quality construction. Heavy stainless steel barrel, stainless steel internal parts, clam shell packaging.

        Bearing buddies are grease-based protective covers that go over the bearing of a wheel on a boat trailer. They are there to ensure that the wheel bearing is always covered in grease. In order to service or replace the wheel bearings on a boat trailer, it will be necessary to remove the bearing buddies from the wheel hub.